Commit Graph

309 Commits

Author SHA1 Message Date
NRK 90bec70e7f fix -Wshadow related warnings
fixes all -Wshadow related warnings (on gcc). this would allow us to use
`-Wshadow` in github workflow (https://github.com/nsxiv/nsxiv/pull/195).

i've thought about adding `-Wshadow` to our Makefile as well, but
decided against it to keep the Makefile CFLAGS barebore/minimal.
2022-01-06 17:53:02 +00:00
N-R-K 1a18523772
fix: reset statusbar after failed keyhandler (#191)
currently if the keyhandler invocation fails, for example due to it not
being present, the statusbar does not reset and stays on "getting
keyhandler input" message.

now the return value from run_key_handler() is used to determine if the
function was successful or not. and if the function failed, we call
handle_key_handler() with false which resets the statusbar.

we also no longer call redraw() within run_key_handler() and instead assign
it's return value to dirty which does a redraw if true.
2022-01-03 09:24:26 +00:00
N-R-K 0f3766eaab
fix: animation slowdown when zoomed in (#200)
rendering is a pretty expensive operation, especially when scaling with
anti-aliasing. by waiting for the image to render before setting
timeout, the actual timeout ends up being (render time + actual delay).

this pretty much fixes the slowdown entirely on all the images i've
tested. it should also improve things noticeably even in cases where
the delay between frames is shorter than how fast we can render.
although on such images, the issue may not be fixed entirely.

Closes: https://github.com/nsxiv/nsxiv/issues/70
2022-01-03 02:07:43 +06:00
N-R-K ff88908531
specify func argument and related cleanup (#183)
* specifies the function argument type in commands.h compared to leaving
  it unspecified. all the functions in cmd_t must have arg_t as it's
  argument.
* changes to commands.h will now trigger a rebuild - this restores old
  behavior prior to 12efa0e
* cg_quit now uses it's argument as exit status
* DestroyNotify invokes cg_quit rather than calling exit directly.
* Explicitly pass EXIT_SUCCESS to cgquit in keybinding

Co-authored-by: Berke Kocaoğlu <berke.kocaoglu@metu.edu.tr>
2021-12-19 23:05:35 +06:00
N-R-K 3bc7082f4e
fix: send implicit_mod to process_bindings (#176)
* fix: send implicit_mod to process_bindings

this solves the edge case where someone might have `ShiftMask + A` in
their keybindings compared to a plain `A`.

Closes: https://github.com/nsxiv/nsxiv/pull/166#issuecomment-978853136

* code-style: smuggle small style fix in

win_draw_bar now mimics autoreload_nop.c functions
2021-12-01 05:41:22 +06:00
N-R-K 4396031233
switch back to whitelisting modifers (#150)
* Revert "Allow any set of modifiers to be used in keybindings"

this keeps things equal with sxiv while giving users possibility to
customize USED_MODMASK if they wish.

This reverts commit 3234b0e521.

Closes: https://github.com/nsxiv/nsxiv/issues/149
Closes: https://github.com/nsxiv/nsxiv/issues/123

Co-authored-by: Berke Kocaoğlu <berke.kocaoglu@metu.edu.tr>
2021-11-24 11:44:05 +00:00
N-R-K 0262988671
rename: keyhandler_abort -> KEYHANDLER_ABORT (#172)
with the exception of arrays, all other var names in config.h are in ALL
CAPS. since keyhandler_abort is an unreleased feature, it should be okay
to rename it for consistency.

though.. in the future we should be more careful about naming when
adding new vars to config.h (or the codebase in general.)
2021-11-24 14:38:25 +03:00
N-R-K c6275374b0
mark functions and vars as static (#146)
the goal here to mark functions and variables not used outside the
translation unit as static. main reason for this is cleanliness. however
as a side-effect this can help compilers optimize better as it now has
guarantee that a certain function won't be called outside of that
translation unit.

one other side-effect of this is that accessing these vars/function from
config.h is now different.

if one wants to access a static var/func from different translation unit
in config.h, he would have to create a wrapper function under the right
ifdef. for static functions one would also need to forward declare it.
here's a dummy example of accessing the function `run_key_handler` from
config.h under _MAPPINGS_CONFIG

```
static void run_key_handler(const char *, unsigned);
bool send_with_ctrl(arg_t key) {
	run_key_handler(XKeysymToString(key), ControlMask);
	return false;
}
```
2021-11-20 03:51:49 +00:00
NRK 43fcd2e02e set env var NSXIV_USING_NULL for key-handler and update docs
Co-authored-by: Berke Kocaoğlu <berke.kocaoglu@metu.edu.tr>
2021-11-19 17:02:50 +06:00
NRK 2df33208d7 apply -0 to stdin/-i as well
while i was initially against this since it can be done via `xargs -0`.
the problem with this approach is that there's a limit to how many args
a command can recieve, leading to problem like this [0] when opening
large (1k~) amount of images.

there's no limit on how big stdin can be, so being able to read a
null-separated list from stdin doesn't have this problem.

[0]: https://github.com/ranger/ranger/pull/2307#issuecomment-818683515
2021-11-19 17:02:50 +06:00
N-R-K 4a282da692
use dedicated function to process key/button bindings (#166)
Co-authored-by: Arthur Williams <taaparthur@gmail.com>
2021-11-19 05:49:42 +00:00
LuXu 36f42081d0
make width of navigation area configurable (#155)
this allows users to configure navigation width from config.h. it also
allows disabling the navigation function entirely by using a 0 width.

one extra functionality this adds is being able to define an absolute
width (in pixels) instead of just percentage via `NAV_IS_REL`.

Co-authored-by: NRK <nrk@disroot.org>
2021-11-04 04:20:28 +00:00
NRK d0b5005a02 -0 sends NULL separated file-list to key-handler
with this change `-0` is turned into a more generic switch which can be
used to send NULL-separated file-list to the key-handler as well.
this also means `-0` no longer implicitly enables `-o`

Closes: https://github.com/nsxiv/nsxiv/issues/140
2021-10-29 17:45:55 -06:00
N-R-K 850bc788c3
code-style: general cleanups (#137)
* tns_clean_cache: remove unused function arg

* remove malloc casting

* improve consistency

use sizeof(T) at the end

* avoid comparing integers of different signedness

* use Window type for embed and parent

* remove unnecessary comparisons

* remove cpp style comments

* improve consistency: remove comma from the end of enumerator list

* Removed useless _IMAGE_CONFIG defines

* consistency: use the same order as snprintf

* Resolve c89 warnings


Co-authored-by: uidops <uidops@protonmail.com>
Co-authored-by: Arthur Williams <taaparthur@gmail.com>
2021-10-29 02:00:53 +06:00
eylles 5b3221cfa6
update copyright notice (#139) 2021-10-28 16:41:16 +06:00
javad bbebd45ce6 code-style: remove extra casts (#130)
Co-authored-by: N-R-K <79544946+N-R-K@users.noreply.github.com>
2021-10-24 06:41:17 +06:00
Arthur Williams 12efa0e3b4 Add ability to bind arbitrary functions.
Before all the predated commands where kept in an array and their
indexes were used in bindings. This meant that users couldn't add their
own functions from the config file. Now key/mouse bindings have been
changed to to store the function ptr (wrapped in a cmd_t struct to also
store the mode) directly instead.

General cleanup done in this commit:
Defined `MODE_ALL` instead of using magic number.

For example, suppose one had bindings like:
{ 0,                   XK_q,             g_quit,                     None },
{ ShitMask,            XK_q,             {quit_err},                 None }
{ ControlMask,         XK_q,             {quit_err, .mode=MODE_IMAGE}, None }

The existing binding `q` has been left unchanged and is defined the same
way. However, the new hypothetical binding `Shift-q` can be used to call
the custom function quit_err in any mode (default). `Ctrl-q` on the
other hand will be called only on image mode.

Closes #50
2021-10-13 06:05:00 +06:00
Arthur Williams 5c6947c1c6 Make imgcursor a config variable.
Previously, the value of imgcursor was determined by where a pointer
binding was set to a ci_cursor_navigate. If it was then the pointer
would change to left/right arrows depending on the position relative to
the window. Now the user has full control of over it which also allows
them to preserve the behavior in case they wrap the function.
2021-10-13 06:05:00 +06:00
Berke Kocaoğlu 1449bfc5e9
code-style: fix consistency issues all over the codebase (#94)
* remove duplicate comment
* remove empty tabs and blank lines
* move macros and globals ontop
* comment to seprate function implementation
* fix alignment
* switch to *argv[] similar to other suckless code
* kill all empty last lines
* append comment to endif
* reuse existing ARRLEN macro
* comment fall through
* use while (true) everywhere

Co-authored-by: NRK <nrk@disroot.org>
2021-10-11 09:07:18 +06:00
N-R-K 6ce94e3e3b
add statusbar message upon key-hander activation (#98)
Currently when running the key-handler the statusbar shows a
"Running key-handler..." message, but there's no indication of the prefix key
being pressed.

There's a slight functional benefit of this patch in the sense
that users can visually tell if the key-handler is listening on input or if the
key-handler has been aborted or not.
2021-10-07 00:37:34 +00:00
N-R-K 0c66c0e25f
make ten_ms local to run (#101)
ten_ms needed to be a global but after the following commit
3724d3fc17 this no longer holds true.
it can simply be local to run, as it's not used anywhere else.
2021-09-29 06:51:13 +03:00
NRK 4ec8fd5377 make keyhandler abort key configurable via config.h 2021-09-24 17:29:30 +06:00
NRK 3bec517655 fix: unable to bind anything to XK_Escape 2021-09-24 17:29:30 +06:00
Arthur Williams 3234b0e521 Allow any set of modifiers to be used in keybindings
Previous the code only allowed ShiftMask,ControlMask or Mod1Mask to be
used in keybindings and the presence of any others modifiers would be
ignored. Most problems generally allow certain modifiers to be be
ignored but not most and certainly don't allow Super-A to be treated
like A.
Now users can use any modifiers they want in keybindings and can also
ignore any modifiers they want. By default only ModMask2 (commonly
numlock is ignored)

Co-authored-by: N-R-K <79544946+N-R-K@users.noreply.github.com>
2021-09-20 11:17:35 +06:00
Berke Kocaoğlu 7cce7ea857 Rename, Update Docs and Prepare for Release (#9)
Co-authored-by: Guilherme Rugai Freire <41879254+GRFreire@users.noreply.github.com>
Co-authored-by: N-R-K <79544946+N-R-K@users.noreply.github.com>
Co-authored-by: NRK <nrk@disroot.org>
Co-authored-by: Arthur Williams <taaparthur@gmail.com>
Co-authored-by: eylles <ed.ylles1997@gmail.com>
2021-09-16 22:55:31 +03:00
Arthur Williams 9c73646d9c Exit when window is destroyed
If the user closed our window, the program won't automatically be die.
It may look dead as there would be no graphical indication that it was
running, but it still would be using/wasting the same resources.
Now the program will abruptly exit when its window is killed.
2021-09-16 22:55:31 +03:00
qsmodo 156a53780c set title based on prefix and suffix (#23)
Co-authored-by: Guilherme Rugai Freire <41879254+GRFreire@users.noreply.github.com>
Co-authored-by: NRK <nrk@disroot.org>
Co-authored-by: Berke Kocaoğlu <berke.kocaoglu@metu.edu.tr>
2021-09-16 22:55:31 +03:00
Bert Münnich 55777ba9f4 Fix indentation 2020-01-16 10:31:41 +01:00
Bert Münnich 07300da7df Do not keep track of fullscreen state
There is no more need for this after the removal of the special color handling
for fullscreen mode in commit 2886876.
2019-07-16 19:26:04 +02:00
Bert Münnich 674f69f2c9 Fix file list indexes when deleting last image
Fixes issue #331
2018-12-29 18:51:14 +01:00
Bert Münnich 0bf3265430 Set window title only once at startup
Putting image info in the title predates the info bar; it no longer seems
necessary.

Fixes issue #318.
2018-10-15 15:29:39 +02:00
Kacper Gutowski e6c9218319 Don't skip dot files when cleaning cache 2018-07-30 10:28:35 +02:00
Bert Münnich 1de5f06f83 Set global markidx whenever a single img is (un)marked
This also sets *markidx* when using the right mouse button in thumbnail mode.
2018-06-09 14:07:13 +02:00
Bert Münnich 5367b75867 (Un)mark thumbnails while holding Button3 down 2018-06-09 13:18:18 +02:00
Bert Münnich 87a1ace8a1 (Un)mark single image through generic function 2018-06-09 13:12:46 +02:00
Bert Münnich a1165df878 Rename variable toggledidx to markidx 2018-06-09 11:57:42 +02:00
Bert Münnich 1e5cc7e382 Fix cg_mark_range after removing images from file list 2018-06-09 11:55:20 +02:00
Bert Münnich cc476be7cc Remove unnecessary special cases in cg_mark_range 2018-06-09 11:52:48 +02:00
Daniel Lublin 6e696ba98c Add mark range function
Sets the marked state of all images ranging from the latest marked/unmarked
image to the current image, to the state of that latest toggled image.
2018-06-09 11:44:47 +02:00
Bert Münnich 09b04d7aef Revise waiting for child processes 2018-02-18 14:51:46 +01:00
Bert Münnich 762420cdf1 Close image-info explicitly 2018-02-18 14:12:41 +01:00
Bert Münnich 4124857137 Skip imlib cache when reloading due to inotify event 2018-02-18 14:12:41 +01:00
Bert Münnich 8017b75de4 Refactoring 2018-01-09 19:37:56 +01:00
Hyleus 6d261b4e7a Fix a potential uninitialized variable 2018-01-09 19:31:36 +01:00
Bert Münnich 8a9e3ea43e Separate bar fields only by spaces 2017-12-07 21:44:59 +01:00
Bert Münnich 30e2356622 Remove obsolete files[].base 2017-12-07 14:16:32 +01:00
Bert Münnich 004fcd5c5b Left bar shows file name as given by user 2017-12-07 14:08:37 +01:00
Squibby eb96c71725 Try to match a fallback font if needed
Fixes #276

Instead of rendering the entire filename at once, Xft will let us do it
character by character. This will allow sxiv to query fontconfig for
a font that can provide any missing codepoints, if needed.

A known issue of this patch is that the "..." dots rendering will not
work properly for very long multibyte filenames. That is because we
cannot easily predict the final width of the rendered filename before
drawing it. I couldn't figure out a clean way to deal with this, so I
ended up just truncating the offending filenames.
2017-12-06 20:39:07 -03:00
Bert Münnich 64b885b6a9 Fix navigating from last to previous image over invalid files 2017-10-26 22:20:39 +02:00
Bert Münnich 2d34c4b9bf Set LC_COLLATE for -r file list sorting
Fixes issue #293.
2017-10-24 21:43:36 +02:00